
No we're not in trouble - at least as far as we know, but we do have a lot of hot water at our fingertips thanks to our solar hot water system. I've even had to adjust the balance on the system because we're making so much of it.
In response to a couple of requests, I'll do a bit more explanation of our
solar thermal domestic hot water system. That's quite a mouthful for something that makes hot water for our household use.
Here's how it works:
Solar Collectors are mounted on the roof. Piping runs through the solar collectors and down into a storage tank. Inside the piping is a glycol solution that picks up heat when running through the solar panels and sheds heat when it gets to the storage tank (The pipes are full of hot glycol. The hot pipes make the water in the tank hot). The hot water, when it's hot enough, goes directly to our showers, baths, sinks, etc. If it's not, it goes to our back up water heater (the water heater that came with the house) and gets brought up to temperature. Sounds so simple you'd think a code inspector would understand it right? Well, I suppose that's another story for another time.
Right now, our water is plenty hot. This winter, I expect the water heater will have a little work to do, though not nearly as much as it's had to do in the past.
Our solar panels are
Solar Skies SS-32 Flat Plate Collectors, 4'x8' mounted at 45 degrees. We mounted them "landscape" rather than the traditional "portrait" to reduce their profile. Mario of
Best Power International custom designed this system and improved the way the piping works in this type of installation. We're getting higher efficiencies and a much sleeker aesthetic. It's pretty dang sexy.
The panels have anodized aluminum frames, low iron textured glass and a high efficient nickel-chrome selective surface copper absorber. All of these things increase solar energy transmission - making them more efficient.
Our Solar storage tank is an 80 gallon
Rheem HE Soleraide tank (in addition to our 40 gallon water heater - so we have 120 gallons of superbeautifulandwonderful hot water when we want it.
The system also has an expansion tank, a controller, sensors and a
Caleffi Pump assembly.
The pump and valve system essentially manages and controls water temperature. It brings in cold water when it needs to or sends the warm water to be made hotter in the existing water heater. (If the existing water heater hadn't been a fairly new, energy efficient model - we'd have done a different kind of combination system.)